Dual Strobe - Visual Warning Device

The Tyco EA0313 Dual Strobe incorporates two visible notification appliances, to accommodate those applications where a two stage alarm system or two distinct visible signals are required. The robust housing comes complete with four self tapping screws for fastening and four screw covers for aesthtics. As standard, the dual strobe has alert and evacuate labelling for amber and red lamps respectively.

Downloads

QE90 EWIS Peripherals Data Sheet


40020 - Weatherproof Red Strobe

The 40020 is a surface mounting weather resistant strobe, designed to be mounted on an external wall to assist fire brigade personnel in locating the designated entry point of a building, in accordance with AS 1670.1.
A rubber seal in the base ensures protection against moisture entry and provides its weather resistance.
The 40020 is constructed of fire resistant ABS material.
Screws and screw caps are supplied.
The 40020 is constructed to comply with AS 1603.11.

Specifications

  • Operating Voltage: 20 to 30Vdc
  • Inrush Current: 290mA @ 24Vdc
  • Operating Current: 140mA @ 24Vdc
  • Flash Energy: 2.6J
  • Operating Temp: -5°C to +60°C
  • Relative Humidity: 10 to 95% (non-cond.)
  • Cable Termination: 2x1.5mm2
  • Dimensions (HWD): 180x130x85mm
  • Weight: 350g
  • Ingress Protection: IP54
  • Part Number: 40020

PA1043 ISO 8201 Strobe Driver Module

The ISO 8201 Strobe Driver generates an ISO 8201 compliant “T3” pattern for the Multi-Candela strobe 4906-9104. It connects directly to a supervised relay output of a fire alarm panel and drives one or more lines to strobes with a synchronised T3 pattern. The fire alarm panel’s output supervision supervises the wiring from the panel to the strobes. The output signals of up to 5 modules can be synchronised.

Specifications

  • Operating Voltage: 17 - 30Vdc
  • Operating Current: 25mA
  • Quiescent Current :Nil
  • Output Strobe Current: 2A max
  • Dimensions (mm): 93 x 67 x 20
  • Operating Temp: 0°C to + 45°C
  • Relative Humidity: 0% to 95% (non-cond.)

4906-9104 Synchronised Strobe

The 4906-9104 Multi-Candela strobe is a high output xenon strobe capable of signalling evacuation using the ISO 8201 “T3” temporal pattern, as required by AS1670.4-2004 and AS 1670.1-2004. It is ceiling mounted and produces white light with a link-selectable intensity of 15cd, 30cd, 75cd or 110cd. It is usually controlled by the ISO 8201 Strobe Driver Module (PA1043) or a QE90 STRM Strobe Relay Module. A 24V output cannot be used.

Specifications

  • Operating Voltage: 16-33Vdc
  • Average Current1: 41 to 164mA
  • Max. Current2: 75 to 316mA
  • Peak Current (24Vdc): 570mA
  • Luminous Intensity3:15 to 110 cd
  • Operating Temperature:0°C to +50°C
  • Relative Humidity (max): 10% to 93% (non-cond.)
  • Dimensions (LWD): 121x75x67mm
  1. Typ. current at 24Vdc depends on brightness
  2. Max. current at 16Vdc depends on brightness
  3. Link selectable intensity 15, 30, 75, 110 cd